Display for iPhone 17 Pro Original Pull (Diagnosticerbar)

Original 'Pull Off' Display Unit for Apple iPhone 17 Pro

iPhone 17 Pro Mounting Frame, OLED Display, Display Glass and Touch Screen (Digitizer)

For all colors.

Installation Guide:

Make sure your iPhone is updated to the latest iOS version.

Ensure that your iPhone is connected to Wi-Fi.

When pairing the new screen with the phone, it’s important that:

• The screen is not programmed with True Tone data

• The front flex (the flex cable with proximity and light sensor) is not connected to the phone

From iPhone 13 and newer, a temperature sensor is located in the front flex. If the front flex is not connected, the phone will automatically restart every 3 minutes.

This means that when installing a diagnostic screen on an iPhone 13 series or newer, you must start the parts pairing process within 3 minutes of powering on the device.

Once the screen is installed, a prompt will appear at the top of the settings menu allowing you to begin pairing with the new screen.

After the pairing is complete, the phone can be turned off, the front flex can be connected, and the device can then be fully assembled.

The new screen will now appear in the parts and service history.

Attention! Only Display / Spare parts, not a new iPhone 17 Pro mobile phone.